The Manual Reset Methods For Brother Printers

www.thetechnicaljunction.com

1) Disconnect Brother Printer from Power Cord.
2) Press Set Button and While holding the Set Button and Re-connect the Printer to the Power Cord
     (Electric Source).It will display an error message "Machine Error 46" on the LCD.
3) Press the "Arrow Up Button" ( ^ ) there will be numbers that are going to be display.
4) Choose "8" then press Set Button.
5) Press "Arrow Up Button" ( ^ ) again then Choose Zero (0) and Press Set Button again,
     (Now You will enter Service Mode.)
6) Press "Mono key/Button" 25 Times or until "Purge Counter Appear"
7) Now Press Arrow Up ( ^ ) again then Choose "2" and Press Set Button.
8) Press Arrow Up ( ^ ) again then Choose "7" and Press Set Button.
9) Press Arrow Up ( ^ ) again then Choose "8" and Press Set Button.
10) Press Arrow Up ( ^ ) again then Choose "3" and Press Set Button.
      (The Purge Counter will be Reset to Zero. Now Press Stop/Exit Button.)
11) The Printer will return to "Machine Error 46" again.
12) Press Arrow Up ( ^ ) again then Choose "9" and Press Set Button.
13) Press Arrow Up ( ^ ) again then Once more Choose "9" and Press Set Button.
      (The Printer will Reset then wait until it Power Up again.)